2015
PHB Weserhütte (Grupo TSK)
- Completion of work outside the initial order, further to the modifications made after subsequent reviews of the manufacturing plans relating to thermal power station El Litoral (Carboneras, Almeria)
Abengoa Solar
- Modification of pipes.
- General repairs.
- Supply of an aluminium ring for QC-17 compressor radiator at thermal-solar plant Solacor I (El Carpio, Cordoba).
- Replacement of valve
- Service to replace fused pipes
- Supply and assembly of support
- Standstill 2015 at Solaben II and III
E.On Generación
- Bending of boiler pipes.
- Recovery of valves.
- Reloading and machining of shaft.
- Repair of desox agitator.
- Manufacture of belts and sheet for valve.
- Repair of desox agitator torch.
- Internal reconstruction of the body of valve .
- Maintenance.
Enel Ingegneria e Ricerca
- Inspection of the main structure of the boiler of the thermal plant in Carboneras (Almeria)
Empresa Carbonífera del Sur (Encasur)
- Machining jobs.
- Corrective maintenance of metal fabrication workshop at their Puertollano (Ciudad Real) facilities.
- Manufacture and assembly of pipes and structures.
ABB (Asea Brown Boveri)
- Supply of galvanised parts as per plans
Empresa Municipal de Aguas de Córdoba (EMACSA)
- Maintenance
Coraci
- Metal fabrications jobs.
Nextera Energy España
- Manufacture and assembly of pipes and structures.
Ormats Mantenimiento Integral
- Supply of deposits
- Opening and closure of manholes
- Cutting and welding of valves.
- Repair of safety valves.
- Reloading and flattening of the lips.
Torresol Energy O&M
- Standstill 2015
- Performance of work at thermal-solar plant Gemasol (Fuentes de Andalucía, Seville)
Gestión de Biomasas
- Repair of the biomass grinding mill’s reducer
- Repair of the mill’s reducer assembly
Andritz Ingeniería
- Repair of axle
- Supply of AISI-316L plates
UTE Tría Mantenimiento
- Reloading and machining of jack
Planta termosolar de Extermadura I y II
- Supply of 24' pipe at Termosol I and II
Valoriza Energía Operación y Mantenimiento
- Cutting teeth on 400 HB anti-wear steel plate of 25 mm thickness, according to the plans provided by the client (id2430)
- Laser cutting of 4 plate units for door cubicle 70, in aisi-304 stainless steel of 6 mm thick according to order id2421, as provided by client.
Helo Recambios
- Repainting 7 spring units, according to the instructions provided by the client
Penibética de Cervezas y Bebidas (Cervezas Alhambra)
- Machining for coupling of O-ring and intermediary disc.
- Repair of barrels
- Repair work in filter
- Standstill works for general repair of cans
Cobra Instalaciones y Servicios
- Installation of valves by welding.
- Lapping of steam valves for standstill in 2015.
Inerco
- Implementation of corrective measures.
Sondeos Jeman
- Machining of spindle
Las Rozuelas del Valle
- Repair of reductor crown.
Flanders Surplus
- Disassembly of equipment
2014
Abengoa Solar
- Supply and assembly of exchangers.
- Modifications of a PVC pipe.
- Supply and assembly of a support.
- Disassembly of water tank in condenser.
- Supply and assembly of ø1' sch. 80 pipes.
- Insertion of a flange kit and extension of chimney.
- Supply and assembly of HTF by-pass and valves
- Various jobs on plan 54.
- Replacement of valve.
- Supply of platforms.
- Replacement of RTJ flanges.
- Abrasive blasting of blowdown deposits.
- Mechanic and electric fitting of a flowmeter.
- Supply of removable textile isolation material.
- Supply and fitting of gate valves.
- Replacement of absorbent pipes at thermal-solar stations.
- Performance of lagging works.
- Supply and fitting of pipes and gate valves.
E.On Generación
- Supply of linings to trunnion cradle.
- Repair of tempering valves.
- Repair of two carbon mill drivers.
- Repair of double joints of belt plaster.
- Repair of driver and driver washer of pump.
- Removal of welding of mesh and blasting of turbine high-pressure input valve filters.
- Repair of butterfly valve.
- Supply of axle and screwed agitator paddles.
- Various machining jobs.
- Repair of the agitator spindle.
- Various repairs performed at the water run-off plant.
Enel Green Power
- Supply and fitting of 90 pins for the end overheater.
Empresa Carbonífera del Sur (Encasur)
- Manufacture, supply and fitting of stainless lining.
- Supply and fitting of rhomboid mesh.
- Cleaning of dust capture conduits.
- Reapply threads of pump spindle.
- Supply and fitting of butterfly valve.
- Supply and fitting of protection pipes.
- Various jobs to adapt the facilities.
- Manufacture and fitting of by-pass.
- Supply of chute and vibro anchoring.
- Supply and fitting of stairs and railings.
- Supply and fitting of lower area of belt.
- Additional work to modify filters.
ABB (Asea Brown Boveri)
- Supply of supports.
- Supply of stainless steel parts.
- Supply of galvanised supports.
- Supply of supporting structure.
- Supply and fitting of track beam.
- Supply of utensil kit for assemblies.
PHB Weserhütte (Grupo TSK)
- Supply of small metal fabrication work.
- Supply of galvanised plate z275, according to plans provided by the client.
- Workshop engineering.
Smurfit Kappa Container
- Performance of various jobs in their facilities in Cordoba.
- Manufacture and supply of staircase and various jobs.
- Modification of supporting structures.
Coraci
- Supply of TEE DN1200x1200 mm.
- Supply of zinced special flanges DN400 and 26 mm.
- Supply of 4 DN200 flanges in stainless steel AISI-316.
- Supply of a carbon steel structure A516 gr. 70.
- Supply of 2 special zinced flanges DN500 150 #.
Deoleo
- Fitting and adapting refrigeration line.
- Adaptation of format of carafes.
- Performance of various jobs on packing lines.
- Connections from pipes to packing line.
- Change of machines.
- Modifications to the water mains.
- Manufacture, supply and fitting of handrails.
- Supply and fitting of platform.
Nextera Energy España
- Calibration of PSV boilers.
- Isolation of levels.
- Replacement of HCE.
- Isolation of vents.
- Supply of platform on plans provided by the client.
- Replacement of crossover.
- Protective lining of ball joint.
- Supply of isolated steel deposits.
- Supply of platforms.
- Replacement of pipe and ball joint.
Torresol Energy O&M
- Fitting of valve.
- Repair of fissure in salt deposit.
- Repair of steam scape at elbow.
- Replacement of mesh in pump filter.
- Disassembly, abrasive blasting and painting of section of the fan at the refrigeration tower.
- Work at thermal-solar station Gemasol.
- Replacement of PSV.
Gestión de Biomasas
- Modification and repair of tension pulley.
- Supply of rod and pin.
- Manufacture of plate conduit in carbon steel.
- Supply of ribs, supports and Redler pins.
- Supply of ribs for Redler according to sample provided by client.
- Supply of tension pulley kit.
- Fitting of nozzle and screw conveyor to feed boiler.
- Repair of millstones in mill grinder.
- Manufacture and supply of mill bench.
- Supply of adaptor for JCB pin holder.
- Repair of biomass mill grinder at our workshops.
- Welding of rod of the stabiliser of loading blade.
Sociedad Financiera y Minera
- Supply of flap valves and spindle units for distribution valve.
- Supply of lateral wear plate, according to sample provide by the client.
- Supply of lateral air protection, according to plans provided by client.
- Supply of inspection manholes.
Energía La Loma
- Supply of hairpin.
- Supply of hammers for mill.
Packaging del Sur
- Supply of parts for reaction arm in AISI-304 stainless steel, according to plans provided by client.
- Supply of parts for transporter in AISI-304 stainless steel, according to plans provided by client.
- Supply of parts for support of door ball in AISI-304 stainless Steel according to plans provided by client.
- Supply of plates for joining entrances in AISI-304 stainless steel, according to plans provided by the client.
- Supply of parts for cardboard pusher and Linasa gates in AISI-304 stainless steel, according to plans provided by client.
- Supply of parts for Linasa machine.
- Supply of parts for transport of PKS rubber.
- Supply of parts for packer in AISI-304 stainless steel, according to plans provided by client.
- Supply of parts for treadmill, lift, warehouse, introducer and extractor of cardboard, for Euroliva equipment and others in AISI-304 stainless steel, according to plans provided by client.
- Supply of parts for base, support, covers and reinforcement of machine in AISI-304 stainless steel, according to plans provided by client.
- Supply of parts according to plan of robot basic elements provided by client.
Andritz Ingeniería
- Supply of plates.
- Machining of various parts.
- Supply of coupling plates.
- Abrasive blasting of bed.
Sondeos Jeman
- Travelling of welder to the quarry to repair fissure in drilling machine.
- Travelling of operator to quarry to repair a fissure in drilling machine.
Centrifugación Cano León
- Supply of rotors in AISI-304 stainless steel, according to sample provided by client.
Elecnor
- Lapping and calibration
Enresa
- Supply of metal formwork.
- Supply and fitting of roofing for scale areas at container plant.
- Conditioning of warehouses with chemical products El Cabril.
Empresa Municipal de Aguas de Córdoba (EMACSA)
- Adaptation of oscillating system for turbo aspiration boxes.
- Fitting of thickening sieve.
- Installation of raised-access floor.
- Supply of covers.
- Supply and fitting of removable handrailing.
- Supply and fitting of handrailing.
- Supply of a deposit sieve for pre-treatment.
- Supply of a thickening sieve.
- Adaptation of decanters after removal of bushes.
- Repair of entrance gate.
- Supply and fitting of skirting and intermediary bar of handrail at the PA system towers.
- Supply and fitting of decanter handrailing.
- Supply of basket for fountain.
Cobra Instalaciones y Servicios
- Team assistance for calibration of psv.
- Valve calibration work at their facilities.
- Valve calibration work.
Inabensa
- Manufacture of a preformed reactor and two desulphurisation reactors.
Herlo Recambios
- Supply of body built kits, according to the samples provided by the client.
- Modification of lateral and rear doors at our facilities, according to instructions of the client.
Acciona Energía
- Supply of vent in soundproofed cabin of burners at stations.
Penibética de Cervezas y Bebidas (Cervezas Alhambra)
- Repair of cover of the heat exchanger.
- Repair of the valve and shaft according to client’s instructions.
- Technical assistance work on standstill 6/10/14 to 11/10/14.
- Supply of one 1000x100x8 mm plate and one 1500x60x8 mm plate in AISI-304 stainless steel.
- Coupling machining for O-ring on intermediary disc in stainless steel.
- Disassembly and move to the machine loading area (MEAD) in its facilities in Cordoba.
- Performance of administration work at the Cordoba facilities.
Planta Termosolar Extremadura I y II
- Replacement of ball joint in November 2014.
- Turbine intervention work.
- Fitting of mechanical protection with perforated plate to valves and accessories.
- Lapping of overflow valves at Termosol I and II.
Empresa Provincial de Aguas de Córdoba (EMPROACSA)
- Supply of DN100 PN25 flange in carbon steel.
- Repair of air and water mixer in our facilities.
- Supply and fitting of decanters for sewage plant.
Sivacal
- Calibration PSV at thermal-solar station
Applus Norcontrol
- Calibration of PSV at station
Minas de Aguas Teñidas (MATSA)
- Supply of platform on screening machine (grinding area).
- Supply of oxygen-cut flanges for sample taking MATSA.
- Manufacture and supply of primary grinding hopper according to set of plans.
Valoriza Energía Operación y Mantenimiento
- Supply of items for support of blades and scrape.
- Supply of parts for the pulley support.
- Supply, cut and bending of parts for repair of screening machine.
- Supply, cut and bending of covers and flanges for conditioner.
- Supply, cut and turning of parts for Redler feed.
- Supply of front end-loader bucket in 400 HB.
Ferrinox
- Supply of infeed and outfeed star wheels.
Energías de la Mancha Eneman
- Supply of 5 hammer kits for the mills.
- Supply and fitting of sample coolers.
Kassandra Esenciaoliva
- Supply of flanges according to client specifications.
- Supply of deposit of 2000 litres in AISI-304 stainless steel.
- Manufacture and supply of reactor in AISI-316.
DF Operaciones y Montajes
- Supply of hammers for mill.
- Supply and fitting of sample coolers.
Caesdesur
- Cutting and supply of carbon steel plate.
- Laser cutting of rings.
- Cutting of reinforcement lips of connections and disc cutting ø80 mm in S275 JR carbon steel plate of 6 mm thickness, according to plan provided by the client.
- High-definition plasma cutting of parts for supports made in S275 JR carbon steel of 15 mm thick, according to plan provided by the client.
- High-definition plasma cutting and drilling of 6 units in S275 JR carbon steel plate of 20 mm thickness, according to plan provided by client.
Lafarge Cementos
- Manufacture and supply of surge pipe at 2nd stage of exchanger tower, according to plan provided by the client.
Mave
- Supply of various parts in AISI-304 stainless steel of 4, 25 and 30 mm thickness, according to drawing provided by the client.
- Supply of various parts in AISI-304 stainless steel of 4, 20 and 30 mm thickness, according to drawing provided by the client.
UTE Tría Mantenimiento
- Manufacture and supply of nuts for jacks in brass. - Repair of 4 wheel units, supply of crown and supply of red brass housing
Hera Tratesa
- Fitting of pipe for cabling in hydrocarbon separator.
- Supply of platform for hydrocarbon separator.
- Various jobs.
Sierragres
- Supply of wheel loaders and support for stacking pin.
- Repair of various components according to the instructions provided by the client.
- Repair of components of pendular mill, according to instructions of the client.
- Repair of stub of rotor shaft and extension of shaft stub.
- Supply of fire deflective plate.
- Various jobs.
Grupo Navec Servicios Industriales
- Supply, turning and welding of uniformation nozzle in S275 JR carbon steel plates of 5 mm thickness.
- Performance of non-destructive trials in reboiler casing and distribution.
- Supply of pipes for connections of reboiler casing and distribution.
- Supply, turning and welding of two cones and two cylinders for ejector in S275 JR carbon steel plate.
- Supply of reboiler casing and distributor.
Aplicaciones Medioambientales de Córdoba
- Service of a lift and transport platform to the C.T.P.N.
Transportes y Áridos Trometrans
- Supply of disc ø1170 in S275 JR carbon steel plate of 20 mm thickness.
- Supply of spindle for gravel machine according to sample provided by the client and repair of roller bearing housing of body of crushing machine.
Encofrados IDE-K
- Abrasive blasting and painting of formwork
Ferrovial Agroman
- Servicing of mobile lifting platform, jobs Grupo III.
- Replacement of post of entrance door.
- Supply and fitting of handrail of drains.
Sovena España
- Replacement of equipment.
Transportes Ledesma Chaparro
- Boring of housings for arm turn of backhoe excavator.
Aceites y Energía Santamaría
- Supply of teeth in A310.
- Repair work in extractor’s boiler.
M. Lusan TNT
- Servicing of JCB equipment at Pedrique.
- Servicing of equipment to transfer a sculpture.
Sociedad de Cementos y Materiales de Construcción de Andalucía
- Various jobs on roof of coal mill.
- Supply of flange for control of Ventek K-10 ventilator blades of the Polysius mill.
Masanes Suministros Industriales
- Chiselling and abrasive blasting of pump body, according to instructions provided by client.
- Abrasive blasting service.
Minas Barita
- Supply of 3 sections of endless spiral in S275 JR
Talleres Gutiérrez y Gómez
- Supply of oxygen-cut parts in 10mm plate.
- Abrasive blasting of balconies for a building work in Cordoba
Taim Weser
- Workshop fitting of parts of machines.
- Supply of small parts for machines.
- Supply of parts of machines.
- Supply of hand railings, supports, platforms and shaft ladder, coke overhead crane.
Preparados y productos artesanos La Perla
- Supply of glue bath. - Supply of 1500x1000x1 AISI-304 stainless steel plate.
FAESA
- Supply of transition and section tubes in 400 HB anti-wear steel plate of 10 mm of thickness, according to plans provided by the client.
- Supply of 1 chimney unit ø 3300 mm and 38000 mm height in S355 JR carbon steel and S275 JR and spiral staircase with Access platform to points of measure in S275 JR carbon steel, according to plans provided by the client.
- Planning of 4 units of A02 support plates of A belt, according to plans provided by the client.
Suministros Industrial Sierra Cuenca
- Modification of sandpit.
Aldebarán Energía
- Administration work for various professional categories at station Aldebaran.
- Chemical analysis of traction and drawing of the turbine bearing pad.
Alstom Power
- Modification of oil pipes for alternator closure to carry out flushing.
UTE Operadora Termosolar Guzmán
- Replacement of valve and insertion of vent in sealing steam pipe.
Covap
- Supply of shoe for mower, according to sample provided by the client
Magtel
- Manufacture of flange according to drawing provided by client.
UTE Abener – Teyma – Solaben (Planta Logrosan I)
- Fitting of compensators, isolation and tracing of pump.
Mantenimiento y Montajes Industriales (IMASA)
- Price list for administration work for their facilities.
- Supply of 6 kits of 8 units of pin for M2-270 mills of biomass station La Loma (Villanueva del Arzobispo, Jaen)
UTE Africasolar
- List of unit prices for the performance of administration work.
- Valve change and repair of pores and leaks during standstill.
Calenergía Management España
- Supply of manhole cover in AISI-316 stainless steel.
- Supply of leadscrew in A304 for ashtray.
- Supply and fitting of structure supporting boiler and economiser structure.
Cementos Cosmo Sur
- Inspection of tanks
Sulzer Pumps Spain
- Price list for administration work at Solaben I.
- Transportation of pump to Burgos